How to Use A Bandsaw – A Guide for Beginners

bandsawA band saw is a very effective cutting device with a long blade created using a band of toothed metal. There are a few distinct varieties of band saws, each of which may come with either 2 or 3 rollers to drive the blade. Band saws provide a variety of applications. Even though they do not cut straight nearly as effectively as a table saw would, they are easier and safer to operate. A table saw can cut more complex joints such as dadoes, but a router is just capable of cutting similar joints.

Is Bandsaw An Effective Tool?

A band saw is unquestionably an item that most people agree should be on their “important” tools list. This is particularly true if you want to make any cuttings beyond the simple types that are most often done. When it comes to producing any uneven cutting, a band saw provides outstanding flexibility due to its adjustable blade.

There are a number of saws that can produce intricate cuts, but bandsaws are perhaps the most user-friendly and efficient. When equipped with the appropriate blade, bandsaws are capable of making curved or straight cuts in both metallic stuff and hardwood.

There is a wide range of thicknesses and numbers of teeth found in blades. Blades with a narrower width are more suited for cutting tight curves, while blades with a broader base are more effective at making straight cuts. More significant numbers of teeth per inch result in a more refined amount, whereas lesser teeth per inch produce a more rapid but more uneven one. It’s possible that a decent blade for ordinary usage would have three teeth every inch and a width of half an inch.

How to Use A Bandsaw?

When working with a bandsaw, you need to know how to set it up and how to use it correctly. It should go without saying, but the first thing you should do is check that your kit is in excellent condition.

Check the blade to ensure it is free of any cracks or other problems. After that, turn the tension knob clockwise until the appropriate amount of force is applied to the blade, and ensure that everything is properly lubricated before you begin.

Sizes of Bandsaws

The length of a band saw is often measured in inches, with a 14-inch model being the most typical. The term “size” relates to the space that exists between both the blades and the “throat” of the saw, also known as the “columns” that holds the “top wheel.”

Band saws may vary in size from countertop machines measuring 10 inches to freestanding models measuring 24 inches designed for use in professional shops. Saws with a 14-inch blade that are freestanding are likely to start providing the most value for the money, and you may quickly find used models.

If you are not aware of the procedure for using bandsaws, I suggest that you read this post first since there are many other things you need to consider. The next thing you need to do is get some training on utilizing your new tool correctly.

This user guide will walk you through whatever you want to learn to use a bandsaw in a way that is both efficient and straightforward. As soon as you’ve completed reading it, you’ll have a crystal-clear understanding of how bandsaw functions and the many cutting methods used for various kinds of carpentry tasks.

More Details on How to Use a Bandsaw

Bandsaws have a great deal of popularity in carpentry, metalwork, and lumbering, and these saws may be found in commercial and household workshops.

Cutting the Curves

The band saw is best at cutting curves, and being capable of cutting natural curves provides you with many options for your carpentry works. Choosing the appropriate blade is the first step in cutting curves. If the edge is comprehensive for the intended cut, it will not produce a cut that is precise enough, while if it is too thin, it may shatter very quickly as you handle bends.

It won’t take more than a few minutes to replace the blade on a band saw and get the tension just right. A blade with the appropriate amount of tension will have little distortion and will be less prone to breaking. You may get ready to cut the curves after changing the blade, adjusting the tension, and ensuring that the tracking is accurate.

To start, ensure that the band saw table is perpendicular to the blade by using a compound square to measure the angle between the blade and the table. After that, draw your curvature on the wood using a marker and set the board horizontally on the band saw table. Lock the blade guard into place after lowering it until its bottom is just slightly higher than the height of the board.

After turning on the band saw, set the line drawn so that it is aligned to the blade at the spot where the blade should cut the piece of wood. To cut, place the board in a horizontal position on the tabletop and then carefully pass it through the rotating blade. Do not use excessive force on the wood; instead, push it through with a gentle and consistent effort and let the blade do the job.

Never pull the board off the table, and avoid attempting to reach the opposite side via the saw blade. When you want to move the board to follow the curving line drawn, move it left or right. Keep turning the board and sliding till the whole surface has been cut, and then take the wood off the tabletop once the blade has completely stopped.


When making straight cuts with a bandsaw, the most important thing to remember is to continue moving to avoid getting stuck. Because frequently pausing in the process can leave rough spots on the wood, which would be a problem if you are working on straight cuts.

The band saw is also very good at making precise straight cuts in several materials. A band saw can perform a wide variety of operations, including resawing, sawing thin pieces of plywood, and even rough-cutting timber from logs. To make these cuts in a straight line, you will require the appropriate blade and a solid fence. The fence must be affixed at a perpendicular place to the blade, often on the left-hand side.

Resawing Boards

Bandsaw blades with a minimum width of three-quarters of an inch are recommended for resawing boards, which refers to cutting thin boards out of wider ones. Because of its greater width, the blade will stray less and refract less. Furthermore, the cutting profile of the blade should be relatively thin so that there is less material wastage.


Above, we have discussed how to use a bandsaw and some of the applications for a bandsaw. Because of the variety of cuts that may be made with a band saw, it is often utilized in place of other kinds of saws in various applications. The band saw’s flexibility sets it apart from other cutting tools; it can slice or cut through multiple materials, including hardwood, metals, and plastic. After learning about the uses of band saws, it is up to you to choose which bandsaw will serve your purposes the most effectively.

Leave a Comment